Octopath traveller

2 you say? That is 2 more the amount I actually have of real friends

That is for sure a good gap solution. It depends a lot on the space we are talking, and more critically, number of concurrent devices connected. For some use cases converting routers to APS is for sure good enough.

You can use on any computer really (with network connections of course).

I use on a minisforum PC with 2 NICs attached to it. For this solution is usually needed APs (which tends to be better in general, just more expensive). There are people that even use opnsense with proxmox (which is a VERY advanced use case) to have the machine for more things.

One interesting detail: with opnsense you can actually have on the same machine adguard for DNS installed as a service for opnsense (and use opnsense to actually force all DNS to to there, as long is not doh, but that is a bit of a different story).

I checked their page and I have now a personal license. I am going later to try to find out how it works, so we will see

That sounds like a crazy story to find out what the issue was. As I stated somewhere on the thread, ram is not the issue, and the APS are quite new (Aruba stuff that is 1 and a half year old). And the only situation I get this issues is with my phones in specific. I will probably use the smb solution stated before and see how is goes. If the thing still happens, then is hunting time

That is something I can totally do after I figure out this syncthing thing. Probably will use Borg backup but same principle applies

Finished an all nighter memtest with a total of 12 passes. All good on the ram side

That is some crazy story right there. I do know for a fact that memtest needs multiple passes. But in my case the machine only has 1 stick of ram (used to have 2, one died). I will probably do a memtest overnight and get at you tomorrow.

That is some good info here. My HDD is totally fine (checked it very recently actually), as for the ram last time I checked was ok, but can check again to be sure

Great question. I forgot to mention but at this point syncthing is only accessible on my WiFi at home. No VPN to it and no remote locations.

From what I see, kopia is for the desktop. Unless I didn’t see something, it is not available for android, which is where more important to have backup in my case

Never tried unison or resilio can check. As for seafile, that is what I had before. At some point I realized I was getting several issues with desktop mostly, and the storage was only accessible from seafile wich in my case I am not OK with. Mostly was the inconsistencies between oses

I could try to do that, but I simply do not have reproducible steps that are certain to make the problem happen. I am a developer myself, and I absolutely despise when someone says ‘hey, something random happened the other day. I cannot say what are the steps, but it is there’ just to find out in the end nothing is there, or is simply not reproducible no matter what and for reasons that I might never find out

This is an interesting one, will check. Thanks! I do have some smb stuff already on the machine, so this might be an easier solution

From what I tried, next cloud just has so much clutter that makes the syncing part a bit of a slog. If that was rock solid with OK speeds, that would be nice. But there is somich stuff with it that I don’t care and tries to enforce (like users and user groups) that I find just too much

Had a pixel 8, and now a new pixel 9a. I think the problem is actually a bit messy. On my house I have several access points. There is a chance when syncthing is working, and I am going up or down, phone changes the access point. Syncthing possibly gets a ’ oppsie, didn’t finish that! Let’s go for the next one’ kind of issue. Of course, never looked into logs or anything so this is just pure speculation.

Usually the kind of corruption on the photos is the kind that beginning is always there, but at some point gets replaced with gray, hence my theory about the files.

That is actually a good question, in this case the HDD is totally fine. Thing is, the photos only get corrupted very rarely (probably 1 every 3000 or so, and only sometimes) and often photos that got transfered several times to the phone (usually the problem is in the phone. On the desktop never had that)

As for immich, I do know about of but seems to be a bit much for what I need (and only photos AFAIK)

I also run stuff via steamos so I cannot tell much from your setup. However, maybe there is a trick that could potentially work. On the steamos, when you are on to desktopz it is possible to switch between desktop mode and gamepad mode controllers (not sure on exact naming here). You can do this by pressing for a second or two the upper right button from the front (I believe the legend is 3 stripes or similar). On the steamos it changes modes and can help you unblock controls on weird situations.

Maybe this can help?